Auditorium 2
Last Updated: 21/03/2022
Equipped for videoconferencing with limited use of the whiteboard of the auditorium.
- Video: Full HD 1080p (up to 1920 x 1080 pixels) | 720p HD (up to 1280 x 720 pixels)
- Focus mode: fixed
- Focus area: 28 cm ~ 2.47 m
- Focusing distance: 50 cm
- Field of view: Diagonal: 77.5 °
- One-way digital microphone
- Speaker: Frequency response: 200 Hz – 20 kHz | Output: 2 x 5.0 W
- Intel Core I3-4160T, 3100 MHz, 8G RAM, SSD 250 G disc, front usb ports, 80 Plus Platinum power supply
- Monitor
- USB keyboard and mouse
- Windows 10 (64-bit), Microsoft Office 2016 Professional Plus, IE, Edge, Chrome, Firefox
- Brightness: 3300 lumens
- Contrast ratio: 20000:1
- Resolution: 1024 x 768
- Hybrid light source (laser/LED), mercury-free
- Intelligent brightness control
The projector command is on the table top.
The VGA mechanical switch allows you to switch the projection source (audio and video) between the auditorium desktop and a laptop.
- Input A – Connected to the auditorium computer (audio and video)
- Input B – To connect a second computer/laptop (audio and video)
- Output (I/O) – Connected to the mixer (audio) and video projector (video)
Connect the VGA cable identified with the “Portable connect” label to your laptop. Non-analog devices require adapters for VGA.
The VGA/audio mechanical switch is on the top of the teacher’s desk.
- 1 Desk microphone
- 1 Launder microphone
- 2 Hand microphones
2 Speakers suspended on the wall
Door opening reader
If the RFID reader LED turns green or yellow, the card holder is allowed to enter the room and the door opens.
If it goes red, the cardholder is not allowed into the room and the door does not open.
Student attendance
If the RFID reader LED turns green or yellow, the presence is recorded.
If the LED turns red, the presence is not recorded.
Wired Network
WiFi